Whilst on my travels last year I entered a conversation with a well respected rod builder (though not in the UK) and we discussed the merits of 2 legged guides over single leg ones.
We debated the "Weight v Recovery" theory until the early hours and agreed to meet on the field the very next day (well it was just a few short hours later).
We took 2 identical blanks and both rung them in our own preferred methods and then using indentical reels & lines we tested them side by side (with each using both - a fair test).
Well, the single legs give great recovery on the 'swish' test through the air whilst the double legs gave a slower feeling - a much reduced pitch in the swoosh.
On the acid test (casting) we became very suprised as one rod felt less wooly than the other and actually gave better distances needles to say it was the rod with the double leg guides
We placed the rods side by side to get deeper into this debate and our combined conclusion was that the additional surface area of the foot stiffened up the blank under load, where as the single leggers gave a 'wooly' feeling.
Now this was only on 1 type of rod, but I wonder what results would be obtained if the same test was done on a number of blanks.
Over to you.
We debated the "Weight v Recovery" theory until the early hours and agreed to meet on the field the very next day (well it was just a few short hours later).
We took 2 identical blanks and both rung them in our own preferred methods and then using indentical reels & lines we tested them side by side (with each using both - a fair test).
Well, the single legs give great recovery on the 'swish' test through the air whilst the double legs gave a slower feeling - a much reduced pitch in the swoosh.
On the acid test (casting) we became very suprised as one rod felt less wooly than the other and actually gave better distances needles to say it was the rod with the double leg guides
We placed the rods side by side to get deeper into this debate and our combined conclusion was that the additional surface area of the foot stiffened up the blank under load, where as the single leggers gave a 'wooly' feeling.
Now this was only on 1 type of rod, but I wonder what results would be obtained if the same test was done on a number of blanks.
Over to you.
Comment