help any 1

[Scotty91]

ryt got my self two dca molds one 5 oz outha 6oz wen aye put the metal legs in a cnt get em a part takes me lyk 30 min then wen a do get em a part the metel legs dnt stay up ?

[KeithB]

You use two L shaped blanking wires when pouring the lead, then pull those out before you pull the mould apart. Fit the grip wires with rollers afterwards. The rollers slot in the groove in the lead to hold the grip wires up.

[Scotty91]

You use two L shaped blanking wires when pouring the lead, then pull those out before you pull the mould apart. Fit the grip wires with rollers afterwards. The rollers slot in the groove in the lead to hold the grip wires up.

trayed that the led seams to go hard str8t away av even heted the mold up

[KeithB]

Have a look here:

Lead making quick guide- World Sea Fishing Forums | Sea Angling and Sea Fishing Online | Fishing Reports

A good guide on WSF.

[Scotty91]

thanx was doing it all right but not pulling the legs out thanx