outboard motor help

[weggo]

hi,
i have a 25hp main outboard and a 5hp can i rig both up to one fuel line with one priming bulb??
there both 4 stroke
its so i dont have 2 tanks .
so what i mean is putting a t joint above bulb and then going to both motors
any one help.
cheers all

[lingking]

first of all let it be known i am not an expert

hoo ever, you are pushing fuel to two engines as i see it,im guessing one is a sparetherefor wasting what you have sent to the spare engine

personally i wouldnt run with one tank either,two smaller ones would be my choice

alsodont be offended i take it you carry spare fuel and a funnel,for transferring

[codseeker]

the question iz does the 2 enjins both use the same mix ratio

[lingking]

its 4stroke,dosent have mix

[weggo]

the question iz does the 2 enjins both use the same mix ratio

there both 4 stroke ill be useing the 25 to get me out and the 5 moving around drifts both are on petrol only one will be running at one time,
its to stop having to swap over all the time

[weggo]

first of all let it be known i am not an expert

hoo ever, you are pushing fuel to two engines as i see it,im guessing one is a sparetherefor wasting what you have sent to the spare engine

personally i wouldnt run with one tank either,two smaller ones would be my choice

alsodont be offended i take it you carry spare fuel and a funnel,for transferring

thanks no not offended at all there are people that dont and rnli have to pull them out of the +++.
i thought i would be possible to do to make it quicker than switching all the time

[lingking]

id go for two tanks,you should not need to prime every start

[paulR]

i carry 2 tanks and a spare primer bulb and tube as they ofter dry out and split if there the cheap rubber ones. itl just suck in air
olso if petrol get contamanated some how both engeines wont work less chance of two ending up no good mate if ya use a small tank as a spare