Announcement

Collapse
No announcement yet.

Rod rack

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Rod rack

    Need to fit a rod rack to my garage wall to hold about 10 rods , any recommendations about ready made ones or would I be better off making my own ?

  • #2
    I just use plastic fittings for roof guttering, cheap and works!

    Comment


    • #3
      rod rack

      Glasgow angling centre catalogue had one near the back

      Comment


      • #4
        Just did the same thing myself a few weeks ago. I was trying to think of all sorts of ways, pipe clips and all of that stuff, then I had the brainwave of hanging the rods up the way most rod manufacturers recommend. If you use rod bags then most rod bags have loops on the bottom so set a row of sturdy nails equally spaced on your wall then simply hang them up. If some of your rods do not have bags with loops the tie short pieces of string round them to hold them together then hang on bent sections of wire coat hangers on the nails ... Simples.
        Gear: Old Skool !
        ABU 484 MK I (cork) (1976)
        ABU 484 MK II (Foam grips, spigot) (1977)
        ABU 484C original guides version (1978)
        ABU 484CS Fuji guides version (1980)
        ABU 9000C (1976) upgraded bearings
        ABU 9000 The red one (1974) upgraded bearings
        ABU 7000 (1976) converted to 7000C hybrid ceramic

        Comment

        Working...
        X