levelwinds

[RL83]

hi all
just wondering (mainly because im bored) ive got two multipliers that have
had levelwinds on but have been removed! is it adviseable to use shockleader or
straight through incase the leader knot hits the top bar while
im on the subject your views on if you do remove the levelwind do you go the
whole hog and ct convert it or is it fine the way it is any help would be good

[rocketman]

you will need to remove the top bar and plug it then fit a ct bar where the level wind was or save yourself the hassle and buy a ct cage, you must do either one so you can get your thumb right over the spool for casting

[RL83]

you will need to remove the top bar and plug it then fit a ct bar where the level wind was or save yourself the hassle and buy a ct cage, you must do either one so you can get your thumb right over the spool for casting

alright mate
so whats the cheap option? ive looked on flea bay but im not sure on wot to
do mate?

[rocketman]

i would go for the ct cage mate less hassle and smarter job

[carpking]

try Sea Fishing Tackle Shop UK. Discount sea fishing tackle for sea angling UK they will have what you need.

[tinman]

i have abu 7500c3 i have simply removd to level wind, and left the top bar in place, i works fine as a normal multi would i use it as a back up on the beach atm its loaded with sukuma 20lb main with 60lb shock go's like the clappers!, yea am left with two holes but i dont effect the reel at all just keep it well out of the sand, spot on al get some pics on if you like

[RL83]

i have abu 7500c3 i have simply removd to level wind, and left the top bar in place, i works fine as a normal multi would i use it as a back up on the beach atm its loaded with sukuma 20lb main with 60lb shock go's like the clappers!, yea am left with two holes but i dont effect the reel at all just keep it well out of the sand, spot on al get some pics on if you like

if you would mate that would be most helpfull

[bandit]

i have abu 7500c3 i have simply removd to level wind, and left the top bar in place, i works fine as a normal multi would i use it as a back up on the beach atm its loaded with sukuma 20lb main with 60lb shock go's like the clappers!, yea am left with two holes but i dont effect the reel at all just keep it well out of the sand, spot on al get some pics on if you like

If its like the old 7000/7oooc/7000c3 you can put the level wind bar back in the cage, leave the worm drive inside the bar just remove the level wind and the gear wheel thats housed in the left hand side plate or fit a conversion bar

[RL83]

If its like the old 7000/7oooc/7000c3 you can put the level wind bar back in the cage, leave the worm drive inside the bar just remove the level wind and the gear wheel thats housed in the left hand side plate or fit a conversion bar

thats what ive done at the moment mate ive used one of the reels for a while
and had no worries with it so mite just keep it that way mate

[tinman]

pics with out level bar in, works fine.

[RL83]

pics with out level bar in, works fine.

cheers mate looks nice and tidy still aswell
thanks again!

[tinman]

does the job, the ct cage is just the same but without the small holes in my eyes like

[lambtonworm]

does the job, the ct cage is just the same but without the small holes in my eyes like

the CT cage is not the same as there is no top bar and a solid bar where the level wind would have been,with having no top bar you can wrap your thumb over a much bigger surface area of the spool for casting giving you less chance of the spool slipping,leaving the level wind bar out will only give sea water easy access to the inside of the reel while you wind in or through spray ...... a conversion bar and studs will cost around £14 and really is a simple job ...

[RL83]

thanks for all the great advice from all the lads