white spirits

[topbanana]

hello, i was wondering if white spirits would do the same job as lighter fluid for flushing bearings out ? or would this just be stupidity .

many thanks

[the leadman]

i think you will end up with a bandaging head

[TerryC]

White spirit good solvent especially if anyone used WD40 on the reel bearings but it is much slower to evaporate than lighter fuel which usually would be my first choice. To do a really deep clean you will also need to take off the bearing shield from one side of the bearing first. Good luck

[brix]

white spirit

You'll find your lasses nail varnish remover just as good as lighter fluid.no smokin but!!!!

[topbanana]

much appreciated mate, cheers

[Deans]

try petrol.

and dint say i neva telt ya nowt next season

[topbanana]

lol

[anth123]

i use petrol it works a treat

[john/r]

petrol leaves a residue inside but realy does it matter, it all depends how clean you want them.

[Davey-m]

white spirits

Aerosol can of brake and clutch clearner from motor Discount shop. Give the bearing a blast each side pushes all the old crap out. Leave to drying on some tissue paper and re oil using some rocket fuel red or yellow or formula oil.

if the oil is thicker viscosity then allow more time for it to soak into the bearing past the shields. If its thin like the formula stuff its in there like swim wear and smooth running been using some in stainless steel abec 9's for abu 65 rocket for fishing.

[jameswlong1941]

hello, i was wondering if white spirits would do the same job as lighter fluid for flushing bearings out ? or would this just be stupidity .

many thanks

Nothing better than WD 40 M8T.

[ROBBIEMAC]

the pound shop always has lighter fuel for sale.