penn 535 gs breaks

[craig-todd]

can some one tell me where i can get the break blocks from for my 535...
didnt know i had non in until i was talking to a bloke on the pier today and he said i had non when he took it apart, thanxs again if your reading.

[pop39]

hello craig mate i was on the pier fishing ,i was the one with the black n yellow smock on ,your best bet is to look on flea bay should only be coppers

[Persues]

Firstly, if you're casting OK then leave well alone since you're obviously managing fine without them.

If you're nesting regularly then fitting brakes makes sense.

Ewens Tackle Services
Penn Parts & Servicing Technician

Ewen Hill
18 Morar Place
Renfrew
Renfrewshire
PA4 9DP
0141 562 7871
07738 057 831
e.hill370@ntlworld.com

The above address is within casting distance of Penn's old spares outlet address, but I have no idea whether they are still operating from it:

Penn Spares, Cartside Avenue, Renfrewshire, PA4 9RX

John at Sport & Leisure in Blyth has a lot of spares for both Penn and Abu: 01670 365980

Billys in North Shields (0191 259 6262) is a Penn dealer, as is ID Fishing in Newcastle 0191 2763041

Redcar Angling used to have a name for carrying Penn spares as well.

If yours is a mag reel then it can be cast without any brakes in at all, relying solely on the magnets for control. EDIT: posted before I read that yours was the GS and not a magged reel - sorry

Only you can really tell whether you need them or not.

Good luck !