Announcement

Collapse
No announcement yet.

slosh 30 help ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • slosh 30 help ?

    i have just got a slosh 30 in a swop and i turn the brakes off and it sill sound like the on :s but u can tell there not on.. help any one ?
    WEAPONS
    cono flex highlander
    abu 6500 c3 ct mag tuned
    Daiwa slosh 20

  • #2
    u can hear brakes? :S

    Comment


    • #3
      like i can hear it when the brake are on quite loud ?
      WEAPONS
      cono flex highlander
      abu 6500 c3 ct mag tuned
      Daiwa slosh 20

      Comment


      • #4
        Hi you can't turn the brakes on and off on a slosh you can only remove or replace them. The only thing you can turn on an off is the spool click.or you can tighten and slacken the spool

        Comment


        • #5
          aww okay .. so how fast would it be if i remove my brakes ?
          WEAPONS
          cono flex highlander
          abu 6500 c3 ct mag tuned
          Daiwa slosh 20

          Comment


          • #6
            Originally posted by abu View Post
            aww okay .. so how fast would it be if i remove my brakes ?
            Very fast take it easy at first you will get used to not having any brakes in.
            In order to become "old & wise", you must first be young & stupid.
            Age and experience will beat youth and enthusiasm every time.
            Youth and Skill is no match for Age and Treachery.

            This link is good for tide and weather and more http://magicseaweed.com/Tynemouth-Lo...rt/26/tide/uk/

            Comment


            • #7
              Originally posted by abu View Post
              aww okay .. so how fast would it be if i remove my brakes ?
              all depends on your bearings and what oil you use and how tight you have your spool. Open up the left side plate and you will see 2 prongs on the spool, with tiny little drum type things, either plastic or a little fibre stuff... them are your break blocks on the prongs.

              They work by centrifugal force, as the spool accelerates it pushes break blocks (the little drum things) out to the side. The edge of these rub against the rim on the cage, causing friction and slowing your spool stopping/reducing it over running while its accellerating and reaching a stable speed.

              Just go down a field or the beach with someone who knows a bit about the reel, open it up and have a luck 1st though.

              hope that ramble helps... even just a little

              Comment


              • #8
                Both of my SL30SH reels click very slightly on retrieve, even with the spool clicker fully disengaged, so perhaps that's all this is and, therefore, nothing to worry about.

                On the other hand, if it's screaming its knackers off when you cast or sounds like a gattling gun when you retrive, a visit to your local tackle shop may be in order...

                Comment


                • #9
                  They are very easy reels to work on.
                  This link will give you some idea whats inside your reel.
                  DAIWA SL20SH UPGRADE OPTIONS AND INSTRUCTIONS.
                  In order to become "old & wise", you must first be young & stupid.
                  Age and experience will beat youth and enthusiasm every time.
                  Youth and Skill is no match for Age and Treachery.

                  This link is good for tide and weather and more http://magicseaweed.com/Tynemouth-Lo...rt/26/tide/uk/

                  Comment


                  • #10
                    I can second what Pursues said my Slosh30 makes this noise too. You should also make sure the spool click is properly disengaged as they can stick a wee bit. A good clean and a dab of fine grease on the click mechanism should sort that problem out. If you take all of the brake blocks out you will get birdies.

                    Comment


                    • #11
                      thanks every one and i have just looked there non in so i greased parts of the reel up and going to try it soon ... if its the same i think i will let the shop have a bash at fixing it
                      WEAPONS
                      cono flex highlander
                      abu 6500 c3 ct mag tuned
                      Daiwa slosh 20

                      Comment

                      Working...
                      X