new eyes

[ath]

any info on best place to get new eyes on my beach caster

[bushwacker]

£££££££

your question should have on what you want to pay friend whats the rod worth etc

[Mackemchris]

Rutherfords replaced my top eye on my beachcaster other day was only £2.50 like.

[g.ordon]

Rutherfords replaced my top eye on my beachcaster other day was only £2.50 like.

You must be a very valued customer of theirs mate to get that done.

[jordy]

Try ID fishing mate,they`ll have a rod builder no doubt.

[ath]

new eyes

thanks for the info lads cheers

[codseeker]

You must be a very valued customer of theirs mate to get that done.

all it cost me supplied and fitted and im not a regular

[g.ordon]

all it cost me supplied and fitted and im not a regular

Well I'm not really that surprised, guy's been more than helpful with me and I've only used it a handful of times, really he's doing the job for nothing

[peeagee]

I think most tackle shops are the same. If they get your business that's fair enough and there are more people fishing and buying bait. It is in the interest of a local tackle shop to keep people fishing. I'm not trying to slag any tackle shops off but if you didn't have rings you wouldn't need bait. I would rather go to my local tackle shop (Reelsport Hebburn) and give them repeat business once every three month, other than trying to get stuff cheaper over the interweb.

[Mackemchris]

Does anyone know if rutherfords replaces other rod eyes apart from the top eye?

[Mogthemackem]

pm primo man on here (Alan) a very well known rod builder now and does an amazing job at a good cost. Lives near Horden though if that could be a problem. The top eye is easy to replace but the others obviously need whipping which is where the expense starts. I can pm you his number is you pm me

[codseeker]

i was told alan was jacking it in

[Mackemchris]

Right, i've decided to hoy some eyes on myself (first time I've tryed) Got 3 new eyes from rutherfords £3.50 I've put tip eye on stright forward. Now the other two eyes I've threaded on and glued it seems pretty solid, But what do I put over the top the thread???

(sorry for hijacking thread) :-)

[codseeker]

after putting the thread on you use pva type glue ,then highbuild goes on last but you need to keep the rod turned every now and then to stop it from running

[PRIMO MAN]

i was told alan was jacking it in

first i have heard of it....