rod stuck

[Brashy]

Right 1 of me rods is stuck together and has been since xmas last year haha, i was fishing when we had that boat load of snow coming down, i couldnt get it apart so i drove home with it like that :/ , anyways its been sitting there since then and fancy getting it apart, whats the best way to do this before i go trying things, its a anyfish anywhere rock if that helps.
any andvice appreciated

[johnt81]

hi mate try wearing thoose gloves with the really good grip, they worked for my mates rod last year. He tryed everything and when we put thoose on came apart .

[gary2010]

try putting loads of ice cubes around the spigot for an hour or 2 if that doesnt work try boiling water, probly seized together in that time lol

[Greys-Platinum-Gsi]

happend to me and a mate other week , we simply put a bit of washing up liquid in the spigot left it for about 30 mins so it seeped in, 30 mins latter we got hold of the rod pulled and hey presto came apart.

[adam123]

get two people, one twists the top half of the rod one way and the other twists the other, i've had that problem with me afaw before even without the snow.

[sidblank]

try weeing on it

[steve ifa]

Take the but cap of ,using the rod rest leg put it up the middle of the blank you should be able to nock it out with out any great force or doing any damage to the rod, i had to do it one time as i was out fishing by myself and had the same problem and no one to help me take it apart,and it does work, you can only do it if the spigot is thinner on the tip section and they are on the anyfish rods.

let us no how you get on

[<(Andy2009)>]

?

Take the but cap of ,using the rod rest leg put it up the middle of the blank you should be able to nock it out with out any great force or doing any damage to the rod, i had to do it one time as i was out fishing by myself and had the same problem and no one to help me take it apart,and it does work, you can only do it if the spigot is thinner on the tip section and the are on the anyfish rods.

let us no how you get on

Never herd of that option b4. Actually thats quite a nifty idea. Al hav remember that if mine ever gets stuk. Gives me an excuse to take me tripod all the time now!

[thommaz]

Right 1 of me rods is stuck together and has been since xmas last year haha, i was fishing when we had that boat load of snow coming down, i couldnt get it apart so i drove home with it like that :/ , anyways its been sitting there since then and fancy getting it apart, whats the best way to do this before i go trying things, its a anyfish anywhere rock if that helps.
any andvice appreciated

hallow brashy mate long time no heard, happned to me and i used and inside of a ballon, gives gud grip on the rod wen twisting tight lines marra

[TheBigMan]

A couple of bits of inner tube or other rubber is handy to give you a decent grip.

[anth123]

use ppt spray its like wd40 century tell u to use it ad when it comes apart
spray it on both ends ad leave to dry for a few mins. this will stop it
stickin again

[codho]

Give it a good soak in wd 40,then when trying to pull it apart pour boiling water onto the female part of the spigot.might take a couple of goes if it's been stuck for a few month mate,but don't go mad an it will come apart in the end trust me I'm a brain surgeon LOL