Announcement

Collapse
No announcement yet.

slosh 20 brakes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • slosh 20 brakes

    my slosh 20 has just arrived, what breaks do you recomend putting in the red or white? and do u push them all the way down the break?

  • #2
    Have ya used multipliers before ?? if not put both red and white blocks in at first, if you have use them try the red ones i have a slosh and put the red ones in mine.
    Feel free to take a look at my blog.

    http://edds-fishingtales.blogspot.com/

    Cheers eddie t

    Comment


    • #3
      ok thanks, can i still go for it and blast it with both red and white in?

      Comment


      • #4
        If you're not used to multiplyers, i would'nt go blasting it even with both brakes in !
        I have a slosh20 and started with the red brakes, now have one white one in but even with both in there you can still have a blow up...good luck

        Comment


        • #5
          Sloshes arn't renound for thier blast quality,build it up slow mate and see how far you can go with it.The slosh will soon tell you LOL

          Comment


          • #6
            i had 2 reds in mine and it was slow so cut 1 into two peices and chucked out 1 half lol. wasnt very clever as its abit to fast now :L

            Comment


            • #7
              i have 2 big red blocks in my saltist and 2 in my 7ht turbo and they can go out a good distance, never even used my slosh 20 yet il have to see what its like have to see what brakes iv got in it before i use it but il be putting 2 red 1s in that aswell

              Comment


              • #8
                just been out with it had a few hours at the boat house at whitley, i was giving it a fair old wack with both red and white and casting roughly between 100-150 yards, i get the whole concept behind how to use multipliers and didnt birds nest it once, picking it up quickly. oh and i blanked haha, had one decent pull but no conection.

                Comment


                • #9
                  Originally posted by Karl M View Post
                  my slosh 20 has just arrived, what breaks do you recomend putting in the red or white? and do u push them all the way down the break?
                  hi a lot depends on what your casting skills are like, i would put two red ones in at first better been safe than sorry .
                  did you know panel pins comes in diff sizes ?

                  Comment


                  • #10
                    Don't forget oil. The stuff you put in the bearings can make a big difference. For a novice caster or a wild reel a couple of drops of 40w50 engine oil will tame any reel. For more accomplished casters yellow or even tournament rocket fuel in combination with blocks / mag settings is they way to go.

                    I used to run my black 7HT with one white block and yellow rocket fuel in the bearings, for a Slosh I'd reckon one red and the same - go down to two reds and the engine oil for a totally docile reel.
                    CLIP IT AND WHACK IT

                    Comment


                    • #11
                      Originally posted by Karl M View Post
                      my slosh 20 has just arrived, what breaks do you recomend putting in the red or white? and do u push them all the way down the break?
                      if you put a magnet conversion it makes everything simpler and easier plenty available not pricey either and easy to fit. if you are interested i will find link for you.
                      did you know panel pins comes in diff sizes ?

                      Comment

                      Working...
                      X