modifying rods

[DUCKY]

could a tackle shop make a fixed spool rod into a multiplier rod? if so whats are the costs?

[Charlton]

could a tackle shop make a fixed spool rod into a multiplier rod? if so whats are the costs?

all you need is a new set of small eyes. No idea what the cost would be.

[sage]

would it make a lot of difference .... i have heard conflicting reports about it... remove the large first eye and add a couple of rings in between the last 3 rings its ok some say
and i have heard that its to do with the spine of the rod and a total strip down..
and some say unless your a great caster the difference is minimal..
its one of those things i have always wondered about ... cant wait for the answer
cheers Paul

[DUCKY]

any idvice? or would it be better off buying a new rod?

[jordy]

Yeah m8,they could do it,as to the cost of the re-build you`d be better off giving a few shops a ring see what they say.

[bronson]

could a tackle shop make a fixed spool rod into a multiplier rod? if so whats are the costs?

fishermans locker at southwick would rewhip it for you. the lads name is darren whos shop it is canny cheap as well!!!!!!!!!!!!!!!!!!!!!!!!!!!

[PRIMO MAN]

most shops would be able to get it done for you or put you in touch with a rod builder.

[super mag]

any idvice? or would it be better off buying a new rod?

ive just getten my conoflex enigma rewiped a frasers and they have done a great job

[DUCKY]

what it is - the rods a sonik sk3 f/s, but im now using a multi on it, and when reeling in fish its got a bad bend and the line is rubbing on the top with it being a f/sl rod i dont know if its gonne be worth putting smaller eyes onto it, maybe i should just buy a new multiplier rod and keep this rod for the bairn to play with.?

[super mag]

what it is - the rods a sonik sk3 f/s, but im now using a multi on it, and when reeling in fish its got a bad bend and the line is rubbing on the top with it being a f/sl rod i dont know if its gonne be worth putting smaller eyes onto it, maybe i should just buy a new multiplier rod and keep this rod for the bairn to play with.?

the mark 3 sonik are only around a 100 to bye and it will cost around 60 to get the rod fully rewiped so you mite be better off treating your self to a new one m8

[DUCKY]

well looks like ill be saving my pennies up then

[codseeker]

fishermans locker at southwick would rewhip it for you. the lads name is darren whos shop it is canny cheap as well!!!!!!!!!!!!!!!!!!!!!!!!!!!

darren in there will do it for 50 quid spoke to him last night on the same subject thats a bargain