Stuck rod tip

[david.northeast]

The tip of my m427 su is stuck solid into the bit of my rod any idea how to get it out. ? Thanks

[Nooo Fish]

Get someone to hold the butt right at the bottom and you hold the rod at the tip then swing the rod like a skipping rope. For a few seconds. I had to do it when I TT got stuck. It sounds ridiculous but it works.

[tonybax]

I posted same solution last year and it sure does work

[Nooo Fish]

I posted same solution last year and it sure does work

I'm sure it was you who told me about it tony. I had to do it again since as well. Got the spigot rebuilt after the 2nd time though.

[beachbuddy]

I'm sure it was you who told me about it tony. I had to do it again since as well. Got the spigot rebuilt after the 2nd time though.

You need to expand the butt section part of the spigot,make sure the tip section doesn't get warm or the two parts will expand together,possibly try a hairdryer.

[The seas away]

Yep had to use hair dryer on 3cld just quickly warm evenly the outside before the heat gets time to get to spigot used in conjunction with the skipping rope technique if necessary.
Hope you get it sorted.

[david.northeast]

Hair dryer ��

[endurothumpers]

Both sections a good clean with soapy water and a bottle brush for the butt let it dry then a coat of ptfe spray

[david.northeast]

It never sticks. What happened was the reel was stuck in the seat so I held the reel and banged the butt on my boot a couple of times but that ended up forcing the tip further down the spigot joint and ended up too tight to move by hand.