first snapped one reported on Sea Fishing and Sea Angling Online , the sk3 model three foot of tip snapped on a gentle lob out.shame really
Announcement
Collapse
No announcement yet.
snapped sonik rod
Collapse
X
-
what would you expect cheap rubbish from the same place as greys.Goal for 2012 a 30lber
http://www.bullrushlake.com/
Comment
-
sonik rods are desinged/ built and using the same blanks as grays they are the exact copy of grays rods at almost half the price (some times more than half)
the builders of these sonik rods are grays ex staff
they walked out and set up on there own
good luck to them i say
i can remember a few triplex's snaping not to long ago (reported on this site )
ive had a good look at these rods in n e t s (northeast tackle supplies) in grangetown
they seem bang on for under a £100 i may be tempted to get one myself
Comment
-
Originally posted by jimmy View Postnowt the matter with greys rods mateGoal for 2012 a 30lber
http://www.bullrushlake.com/
Comment
-
Originally posted by rod-the-cod View Postyeah your right untill they started getting them abroard
Comment
-
-
greys rod's are now all made of cheese and decorated with marmite
my mk1 rods (orion, pz match) seem bomb proof
went through 4 prodigy rods in as many outings, didn't even bother taking it back the last time, tip section every time, on the 2nd or 3rd ring down
my theory is that as they are machine whipped on a production line, sometimes the whipping is too tight, so when there's flex in the blank there's not enough give, so the seat of the eye puts pressure on the blank and they go pop
2 broke casting, 2 broke with fish onʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ.
Thought for the day:
Some people are like slinkies - not really good for anything but bring a smile to your face when thrown down the stairs
Converting an MFV Fifie trawler type thing.
Comment
-
mark could it be where the whipping is cut off with a blade making a cut line in the finish introducing a stress raiser ?
i think that would cause a snap no problem--------------------------------------------------------------
the Limicoline one
--------------------------------------------------------------
Comment
-
Originally posted by bazw View Postmark could it be where the whipping is cut off with a blade making a cut line in the finish introducing a stress raiser ?
i think that would cause a snap no problemʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ.
Thought for the day:
Some people are like slinkies - not really good for anything but bring a smile to your face when thrown down the stairs
Converting an MFV Fifie trawler type thing.
Comment
-
[QUOTE=mark;149261]greys rod's are now all made of cheese and decorated with marmite
my theory is that as they are machine whipped on a production line, sometimes the whipping is too tight, so when there's flex in the blank there's not enough give, so the seat of the eye puts pressure on the blank and they go pop
Mark, they use a different method of curering the high build.
It is done under UV Light which cures in my oppinion much to quick hence the tyings are brittle.If people think you are an idiot, why speak and remove all doubt !
Comment
Comment