this week paul heads out to test his new built Zziplex Zeteque TXL, using a Chrome Abu 6500 CS Rocket, doesnt all go to plan enjoy
Announcement
Collapse
No announcement yet.
out and about with a zippy
Collapse
X
-
Pmsl that was class lol. It's interesting to see a zippy using century methods reminds me of an old super glue advert where they stuck the impossible together .........a can of Pepsi and a can coca cola lol I think that mated titanium spigot ring looks the dogs danglies
Comment
-
putting high build over the tape will affect the action of the rod ,and the tip sensitivity will be affected for bite indication all so zziplex spigots are reinforced as is the butt on the male section where the tip goes in, they dont need metal bands , as they are strong enough most probably the best in the business .just my opinion
Comment
-
Cracking birdie lol. As far as high build over the reflective tape accounting for the crack off, eh ? Really. Might impede bite registration yes. I know some lads over sunderland way sand down blanks to death to save weight. Proper nutters if you ask me lol.Regards Nicky.
Success is the ability to go from one failure to another with no loss of enthusiasm.
Comment
-
Originally posted by cod magnet View Postputting high build over the tape will affect the action of the rod ,and the tip sensitivity will be affected for bite indication all so zziplex spigots are reinforced as is the butt on the male section where the tip goes in, they dont need metal bands , as they are strong enough most probably the best in the business .just my opinionOriginally posted by cod magnet View Postthe amount of high build applied to the end of the tip covering the reflective tape could of contributed to the crack off, even under whipping rings on a blank affect the action ,CLIP IT AND WHACK IT
Comment
-
Originally posted by Stewart 1971 View PostThat tip ring won't have helped matters either, it's akin to putting solid steel wheels onto a high performance sports car and then expecting it to handle the same way. Fair enough perhaps for heavy rock work and short casts but on a powerful rod like the TXL it will make a big difference to the recovery when power casting
Comment
Comment