Slosh 30 problem

[wavy davy]

The handle on my slosh is keep loosening off, when I try to tighten the nut it gets tight then seems to jump and slacken again, threads look ok and it casts and retrieves fine, any ideas.

[mitch_dow]

Might just be the threads on the nut must be 1 of the 2 that is threaded mate

[endurothumpers]

If the threads look ok on the shaft I'd be looking toward the nut

[Karl M]

Common fault. I tried loctite too but no use. Try and get a hold of the SHA handle and nut. Much better IMO. From Daiwa they are around £26.

[fishingmark]

If the handle nut cap fits correctly the nut should not be able to loosen, it should be locked in place.