Loop rig help

[purron]

Hi all,

Ive been trying to tie a 2 hook loop rig as described on the planet sea fishing pdf.

The problem is I can't get the top hook to stay in the cascade swivel.

Any ideas?


Cheers

[NICKY]

srt spring should sort that out mate

[purron]

Hi nicky,

It has a srt spring all ready on

[codcatcher3000]

is there sufficient tension between the cascade and the bottom clip ? also instead of srt u can also use silicone and a bead to help create the appropriate tension .

[codcatcher3000]

if u r using cascade swivel try to make sure its right way round. i now use bent clip and had similar issues before when it was tied wrong way mate. hope u get to solve it .

[NICKY]

Hi nicky,

It has a srt spring all ready on

Did you get tension on the spring with the rig clipped up before crimping the stops in place ?

[purron]

Ive put a stop knot on the bottom so I can get thr tension spot on.

Haven't got any silicone to try that method codcatcher.

Might try turning the cascade round

[NICKY]

Ive put a stop knot on the bottom so I can get thr tension spot on.

Haven't got any silicone to try that method codcatcher.

Might try turning the cascade round

put a picture of the rig you have tied on mate

[purron]

I think I might have sorted it. It looks like I had the length from the hook to the cascade longer than the cascade to the swivel.
I shortened it by about an inch and appears to have worked.

In total its taken about 1.5 hours to tie and sort this out :-(

Thanks for your help.

[regpude]

plesed you won

I think I might have sorted it. It looks like I had the length from the hook to the cascade longer than the cascade to the swivel.
I shortened it by about an inch and appears to have worked.

In total its taken about 1.5 hours to tie and sort this out :-(

Thanks for your help.

just prey you dont have a snap off 1st cast.hehehe.tight lines.

[codcatcher3000]

I think I might have sorted it. It looks like I had the length from the hook to the cascade longer than the cascade to the swivel.
I shortened it by about an inch and appears to have worked.

In total its taken about 1.5 hours to tie and sort this out :-(

Thanks for your help.

it gets easier buddy dont worry n its a good rig

[purron]

Cheers codcatcher and nicky.

You can always really on reg to chip in with a bit of tomfoolery :-)

[shaun]

I think I might have sorted it. It looks like I had the length from the hook to the cascade longer than the cascade to the swivel.
I shortened it by about an inch and appears to have worked.

In total its taken about 1.5 hours to tie and sort this out :-(

Thanks for your help.

Your hooklenth between hook and cascade should only be long enough to fit your bait in(say 4-5inch for example), then the top bait will be closer to the other bait and lead, making the rig more streamline for casting.

[purron]

Hi shaun,

Now you mention it it does seem pretty obvious.

Cheers