Announcement

Collapse
No announcement yet.

What (HP) engine for 16ft pebble

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • What (HP) engine for 16ft pebble

    Hi everyone
    I have recently rebuilt a fibre-glass pebble/cobble. (replaced woodwork)
    I was wondering what reccomendations anyone would give for an outboard for it?
    Its very lightweight at 16ft.
    I have been told lots of different things?
    I have a motor but Id like to see what anyone says before I tell you what I got.

  • #2
    16ft - light .........

    probably a 20/30 would be fine ...... a 40 would be fast but depends on hull design . . . . .
    ]` ` ` ` ` ` ` ` )
    . . ,,,,,,___[ ~ \___
    ,,;;`` [_________/-,......... Norman......... http://slinkykate.com/

    Comment


    • #3
      all down to hull profile, if it a full displacement (which I think it is but could be wrong) hull I\'d be looking 15hp, expect perhaps 8knots maybe, semi displacement, 40hp will get it going!

      stick 40 on a displacement hull, it might do 10 or 11 knots, but.... you\'ll be looking at maybe 2 miles to the gallon if your lucky, several times that with a 15
      ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ.

      Thought for the day:
      Some people are like slinkies - not really good for anything but bring a smile to your face when thrown down the stairs

      Converting an MFV Fifie trawler type thing.

      Comment


      • #4
        I was gonna put a pic of the boat here but I havent a clue how?
        (img) (img) to much for me?
        Ive got a 9.9 hp motor I was told thats ample for this hull? I had same hull with a 20hp last yr it seemed excessive? and heavy too.

        Comment


        • #5
          id go with mark and look for a 15 hp 4 stroke maybe,as your fuel economy will drain by putting a 40hp on a displacement.

          Comment


          • #6
            Thanks for the feedback guys
            Do you think that 10hp will be sufficient or do you think i need to get something a bit bigger?
            I have seen a boat same dimensions as mine with a 7.5 and it seemed to go ok.
            A lot of people are telling me 10s too small Im getting worried now lol

            Comment


            • #7
              you\'d probably be ok with 10hp, ona 16foot displacement hull 6 to 8knots will be your top whack, but will just sip petrol..

              my last boat was 15\' with a 40hp and I could burn 12 gallons in a day dead easy!


              think about yachts... a 26 foot yacht will wiegh a couple of tons and is full displacement, a 6-8hp will shove it along at 6 or 7 knots,

              only one way to find out though!

              ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ.

              Thought for the day:
              Some people are like slinkies - not really good for anything but bring a smile to your face when thrown down the stairs

              Converting an MFV Fifie trawler type thing.

              Comment


              • #8
                Cheers mate
                Only one way to find out, that sounds about right? cheers lads
                If Im still here to post how I get on It be a good un.
                I\'ll be back...

                Comment

                Working...
                X