Hello all, I was wondering if anybody had advice on maintaining the bearings on my boat trailer during the season when it is being launched in salt water most weekends?
The trailer is braked and has grease nipples on the tensioned wires going into the bearing casing. I am not sure how much grease to pump into them as ive had contrasting information. Some people have said pump grease into them until it comes out of the casing and others have said pump just enough to protect the contents of the casing and make sure it does not burst out.
Also is it just a case of giving the trailer a good hose down with fresh water after each launch or is it a case of taking the casing to bits and properly cleaning the bearings etc each time?
Any help or advice would be greatly appreciated.
Cheers
The trailer is braked and has grease nipples on the tensioned wires going into the bearing casing. I am not sure how much grease to pump into them as ive had contrasting information. Some people have said pump grease into them until it comes out of the casing and others have said pump just enough to protect the contents of the casing and make sure it does not burst out.
Also is it just a case of giving the trailer a good hose down with fresh water after each launch or is it a case of taking the casing to bits and properly cleaning the bearings etc each time?
Any help or advice would be greatly appreciated.
Cheers
Comment